Tractor loader bucket hay bale attachment will accommodate both big and large round or square hay bales. Tractor loader bucket bale mover bale carrier fits over the front lip of loader bucket of tractor, and sits in the bottom of the bucket.
Bucket spice unit is easy to install and easy to remove when not needed. It is secured by 1 bolt located in the back part of the bucket spear frame through the bottom of the bucket. This hole will accommodate a bolt up to 1 inch in diameter, bolt not included. Mounting bolt hole is normally located about 13" from lip of bucket.
We can built it differently to fit your bucket if needed, generally with no additional charge. Call us for desired modifications.
- The attaching strap is 18" long and the 1" hole is 15" from cutting edge.
Tractor loader bucket hay bale carrier and hay bale stacker standard model has
- (1) 48" long spear forged, tapered, and heat treated, spike, prong, tine, sticker, or fork, however it is phrased in your area, that attaches with a cross bolt. This spear can be easily removed or installed from the main frame by simply removing the cross bolt and removing the spear.
- This bucket attached hay mover also has two 17 inch long 1 1/8 inch diameter stabilizers to keep the bale from rotating or turning upside down.
The stabilizers are secured with a sleeve and set screw and can also be easily removed or installed.
It is rated at 2000# but has been tested at heavier weights.
Our 39 inch long spear will interchange in this unit. You can purchase this shorter spear and swap it with the longer 48 inch spear that comes with this hay moving unit.
This loader bucket hay mover is coated with a high quality primer.
The heavy duty 3 inch square tubing frame is 1/4 inch thick for durability and strength. This loader bucket frame weighs 58 pounds and the spears weigh 38